Each DSCL22 loop powered isolator provides 1, 2, or 3 channels of analog signal protection by electrically isolating its input from output for any DC process signal in the range of 0-20mA (or 4-20mA). The DSCL22 operates passively, obtaining its power from the transmitted signal.

The input signal is chopped by a proprietary DC chopper circuit, isolation is provided by transformer coupling, a proprietary technique is used to suppress transmission of common mode spikes or surges, and the output signal from the secondary of the transformer is reconstructed to the original input signal.

If one input to two isolated outputs is desired, multiple channel units may be configured as a splitter (see Figure 2).
  • No Power Supply Required, Signal Powered from 0-20mA (or 4-20mA) Input
  • Simplified Wiring For Fast Installation
  • DIN Rail or Panel Mountable
  • Narrow DIN Package, Mounts up to 27 Devices into a 19” Rack Space
  • No Recalibration or Maintenance Required
  • Up to 4000Vrms Transformer Isolation
  • Prevents Ground-Loop Problems
  • Prevents the Transfer of Interference Voltages and Currents
  • High Accuracy Over Full Span
  • CE Compliant
Loop Powered Isolator - DIN or Panel Mount

DSCL22 Devices


Part Number Input RangeOutput RangeMechanical FormatInternal Power SupplyIsolation VoltageIsolation TypeAccuracySupply Voltage
0 to 20 mA 0 to 20 mA DIN rail,Panel Mount None 4000 Vrms Transformer 1-way ±0.05% Span Typical (at 250 Ohm load) Loop Powered
0 to 20 mA 0 to 20 mA DIN rail,Panel Mount None 2300 Vrms Transformer 1-way ±0.05% Span Typical (at 250 Ohm load) Loop Powered
0 to 20 mA 0 to 20 mA DIN rail,Panel Mount None 2300 Vrms Transformer 1-way ±0.05% Span Typical (at 250 Ohm load) Loop Powered


2 ... Discontinued

Frequently Asked Questions


Can Dataforth provide calibration reports for modules I purchased?
Yes we can provide calibration reports for the modules that you purchased.

You can either
a) visit https://www.dataforth.com/TestDataReport.aspx to search for Test Report Datasheets by Serial Number or
b) you can send us a list of model numbers and their serial numbers to support@dataforth.com

Does Dataforth have a 4-channel 4-20mA isolator?
No. However, Dataforth does have two and three-channel 4-20mA isolators as shown in the following table.

Model Description
DSCL22-11 2-channel 4-20mA isolator
DSCL22-21 3-channel 4-20mA isolator
DSCL23-02 2-channel 4-20mA Isolator with DC Supply for 2-wire transmitter
DSCL24-11 2-channel 4-20mA isolator

Keywords/Phrases: 4-20mA isolator, 4-channel 4-20mA isolator, 4-channel 4-20mA DIN mount isolator

Does Dataforth have an isolator with one input featuring two or more outputs?
No, but this function can be implemented with a two or three channel loop isolator, such as DSCL22-11, DSCL22-21, DSCL24-11, or DSLC24-12. Connect all inputs in series with each other. Sum together all input burden voltages so as not to exceed the maximum loop voltage available.

Keywords/Phrases: DSCL, DSCL one input multi-output loop isolator, one input multi-output loop isolator

How does the load resistance of a module affect the noise at the output?
Noise at the output of a module is independent of load resistance.

Due to resource constraints on my computer, I'm unable to open the three dimensional CAD models provided on your website. Does Dataforth provide two demensional CAD models for download as well?
Two dimensional CAD models can be generated upon customer request. Please contact Customer Service for assistance.
Was this content helpful?    Yes / No

Don't see an answer to your question?

If you have a question that is not answered here, please submit your question using our Online Technical Support Assistance.
Dataforth offers a wide range of custom modules for those instances when our standard commercial off-the-shelf (COTS) solutions don't quite meet your specific application needs. Contact Customer Service and Application Support to discuss design guidelines and design feasibility. Customer Service and Application Support can be reached at sales@dataforth.com or +1-800-444-7644.

We want your feedback!

We are interested in your feedback regarding our products. Please let us know what you think and if you have any questions regarding the DSCL22 and how this product could apply to your application. Your feedback is very valuable to us and very much appreciated.