DSCL24 (multi-channel): Factory Configurable Isolator

Specialists in data acquisition, signal conditioning and data communication

English

Each multi-channel DSCL24 module provides up to 252 different configurations of process current or voltage inputs and outputs. The factory default setting provides 0-20mA input and output current. Alternatively, users may complete and submit a specific configuration table that instructs the factory on how to solder in configuration jumpers.

Each module provides full 3-Way isolation with 2300Vrms CMV input to output and 3700Vrms CMV power supply to I/O protection. Two module versions are offered that accept universal power supply of either 24 to 60VDC or AC and 85 to 230VDC or AC with the alternating current usage accepting 45 to 400Hz power.

Uses Universal Power Supply of 24 to 60V or 85 to 230V AC/DC
Factory Configured Soldered Jumpers Allows up to 250+ I/O Settings
One Input to Two Output 'Splitter' Simplifies a Common Requirement
Three-Way Isolation for 2300Vrms Protection
Prevents Ground-Loop Problems
Prevents the Transfer of Interference Voltages and Currents
High Accuracy Over Full Span
No Recalibration or Maintenance Required
Narrow DIN Package, Mounts up to 27 Devices into a 19" Rack Space
DIN Rail or Panel Mountable

Factory Configurable Isolator - DIN or Panel Mount

DSCL24 (multi-channel) Devices

Part Number	Input Range	Output Range	Mechanical Format	Internal Power Supply	Isolation Voltage	Isolation Type	Accuracy	Supply Voltage
DSCL24-11 ² Order Now	I or V, Factory Configurable	I or V, Factory Configurable	DIN rail,Panel Mount	None	2300 Vrms	Transformer 3-way	< ±0.1% (at 250 Ohm load)	24 to 60 VDC/AC at 45 to 400 Hz
DSCL24-12 ² Order Now	I or V, Factory Configurable	I or V, Factory Configurable	DIN rail,Panel Mount	None	2300 Vrms	Transformer 3-way	< ±0.1% (at 250 Ohm load)	85 to 230 VDC/AC at 45 to 400 Hz

² ... Discontinued

Frequently Asked Questions

Can Dataforth provide calibration reports for modules I purchased?

Yes we can provide calibration reports for the modules that you purchased.

You can either
a) visit https://www.dataforth.com/TestDataReport.aspx to search for Test Report Datasheets by Serial Number or
b) you can send us a list of model numbers and their serial numbers to support@dataforth.com

Does Dataforth have a 4-channel 4-20mA isolator?

No. However, Dataforth does have two and three-channel 4-20mA isolators as shown in the following table.

Model Description
DSCL22-11 2-channel 4-20mA isolator
DSCL22-21 3-channel 4-20mA isolator
DSCL23-02 2-channel 4-20mA Isolator with DC Supply for 2-wire transmitter
DSCL24-11 2-channel 4-20mA isolator

Keywords/Phrases: 4-20mA isolator, 4-channel 4-20mA isolator, 4-channel 4-20mA DIN mount isolator

Does Dataforth have an isolator with one input featuring two or more outputs?

No, but this function can be implemented with a two or three channel loop isolator, such as DSCL22-11, DSCL22-21, DSCL24-11, or DSLC24-12. Connect all inputs in series with each other. Sum together all input burden voltages so as not to exceed the maximum loop voltage available.

Keywords/Phrases: DSCL, DSCL one input multi-output loop isolator, one input multi-output loop isolator

How does the load resistance of a module affect the noise at the output?

Noise at the output of a module is independent of load resistance.

Due to resource constraints on my computer, I'm unable to open the three dimensional CAD models provided on your website. Does Dataforth provide two demensional CAD models for download as well?

Two dimensional CAD models can be generated upon customer request. Please contact Customer Service for assistance.

Was this content helpful? Yes / No

Don't see an answer to your question?

If you have a question that is not answered here, please submit your question using our Online Technical Support Assistance.

Dataforth offers a wide range of custom modules for those instances when our standard commercial off-the-shelf (COTS) solutions don't quite meet your specific application needs. Contact Customer Service and Application Support to discuss design guidelines and design feasibility. Customer Service and Application Support can be reached at sales@dataforth.com or +1-800-444-7644.

We are interested in your feedback regarding our products. Please let us know what you think and if you have any questions regarding the DSCL24 (multi-channel) and how this product could apply to your application. Your feedback is very valuable to us and very much appreciated.